FORGING HAMMER 25000 KG / 480 KJ

Mechanical Characteristics:
- Maximum impact energy (p=9 bars) 480 KJ
- Maximum ram stroke 1150 mm
- Distance between guides 1220 mm
- Work cylinder diameter 1030 mm
- Diameter of distribution valve 400 mm
- Length x width of the fixing support of the die 1800 x 1400 mm
- Total weight of the hammer 458 to

Overall dimensions:
- Total hammer height 10300 mm
- Height above ground 6900 mm
- Maximum horizontal length (without feed pipes) 4920 mm
- Maximum width (without attachments) 3100 mm
- Minimum ground separation line of the mold from ground 700 mm
- Minimum height of die block (without dove tails) 540 mm
- Surface area of the die support on the foundation 4500 x 2700
- Mass of die support 300 tons

Functional features:
- Maximum ram stroke 1150 mm
- Maximum working distance of the slide valve 200 mm
- Working agent pressure 6-9 bar
- Maximum energy at p = 9 bar 48000 daN / m; 480 KJ
- Maximum energy at p = 6 bar 38000 daN / m; 380 KJ
- Maximum weight of the top semi-die 5000 kgf
- Duration of full cycle at full stroke 2 sec
- Working agent: air, hot air at max 180 ° C, steam
- Average air consumption per cycle: 10.75 Nmc / cycle
- Maximum air flow rate 321.5 Nmc / minute
- Average air consumption per minute 250 Nmc / minute

Control of servomechanism features:
- Maximum rod stroke 220 mm
- Control fluid pressure 5 - 9 bar
- Control fluid: compressed air